RSPro Clear Surf Rail Saver - Surfboard Rail Protection



Protect your shortboard, funboard or longboard's fragile rails, especially from transporting scratches and impacts. Great for Kiteboards too!


SKU: RSPROSURF
Price: $40.99
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
RSPro Clear Surf Rail Saver - Surfboard Rail Protection
(Click to see larger image and other views)
The delicate rails on surfboards are subject to scratches, nicks, and scuffs when transporting on your car, getting ready in the parking lot, or storing for the winter. Surf RSPro rail protection is designed to fit low profile rails on your surfboard or kiteboard and gives you an extra layer of defense against scratching and small impacts.

Specifications:
  • 2 strips x 5' (150cm) x 1-1/4" (3.2cm) 200 micron PVC lenticular pattern surface for high impact and abrasion resistance
  • Super-easy installation. Allows repositioning while installing.
  • Won't yellow over time. Will last longer than your board.
  • Keep your board new and safe. Higher board resale value.
  • Designed & manufactured in Barcelona, Spain
  • High impact and abrasion resistance with minimum weight and no drag or slippage.

Tips for a perfect installation:

  1. Don't install it in a cold environment. We recommend to install it at room temperature. Below 68 degrees the material and glue tend to get rigid, so it would make the installation more difficult. If you can't do it at room temperature above that temperature, use a hairdryer or heat gun to apply a gentle heat over the rail protection before, during and after installation.
  2. Unroll the rail protection bands and place one at each side of the board.
  3. Mark with a pencil the center of the rail protection band.
  4. Before removing the backing, place the center of the rail protection band at the center of the board rail and extend it to the nose, mark the board with a pencil where the start of the rail protection band should be. Now you have the perfect placing longitudinally.
  5. Start peeling the front side of the rail protection band and start sticking it where you marked the board and on the edge of the board rail (this is the more external part of the board, and where all impacts will take place). Follow the board rail edge until the end.
If your board coating/painting is weak (usually the case on extremely expensive and on extremely cheap boards), or if you prefer to play around with the rail protection band until you find the perfect spot, spray some clean water over the rail of your board. It will allow you to move the rail protection band, and once placed, remove excess water with a squeegee or similar (example video). The rest of the water will evaporate by itself after some hours.
    We recommend waiting for 6 hours before going to the water.

    If you need to remove it, we advise to apply some heat with a hairdryer or heat gun to soft the adhesive and to make it easier to remove.
    Product Reviews
    Rate this product:  1   2   3   4   5 

    May we also suggest...
    Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.
    © Copyright 2020, North Shore Inc. All rights reserved. Website Design and Development By Red Leaf Development